The Quickie Ti Titanium is constructed with 1" tubing which maximizes the shock absorbing characteristics of the titanium. This Quickie Ti Titanium is one of the lightest, strongest, and most adjustable Titanium Wheelchairs available today.

The Titanium Advantage
Titanium alloy is approximately 3 times stronger than aluminum. This advantage in strength makes it possible to build a lighter, simpler frame. Titanium tubing also provides a more controlled rebound and superior torque strength. With an average weight of 16.9 lbs, the Quickie® Ti Titanium is one of Quickie's premium rigid-chair choices.  

Patented Caster Pivot-Adjuster
To reduce excess weight and caster flutter, our engineers have eliminated the caster housing so that the caster fork now threads directly into the frame. A special pivot caster-adjuster allows the forks to pivot 16° in 2° increments. This feature enables the user to adjust the seat "slope" between 2.5 - 9cm (1" - 3.5") while maintaining a perpendicular caster-wheel/ground alignment. 

Custom Tailored Frame
To ensure the best possible fit, our engineers have developed over 4,000 different frame configurations. Each frame can be customized in six different ways: frame angle (70°, 80°, 85°), frame inset (2.5cm/1", 5cm/2", 7.5cm/3"), front seat-height (40.5 - 51cm/16 - 20" in 1.3cm/½" increments), rear seat-height (35.5 - 48cm/14 - 19" in 1.3cm/½" increments), seat width (33 - 46cm/13 - 18"), and seat depth (35.5 - 48cm/14 - 19"). 

Easy-To-Transport Design
A fold-down back, "L" shaped frame and extremely low frame-weight make vehicle transfers about as easy as loading a briefcase. 

The new Quickie® Ti Titanium chair is distinctly different from the Quickie (GPV) Ti Titanium. Its mono-tube construction and reduced weight creates a fresh concept in titanium chair design. The Quickie (GPV) Ti Titanium chair is now referred to as the "Quickie® GPV Titanium".

The rear axle features 4" of center-of-gravity adjustment in 1/2" increments. When a chair is not properly centered, it feels heavy, unresponsive, and sometimes "tippy". By using a 4" adjustment range that accommodates many different body types, this problem can be avoided.

The Quickie Ti Titanium features new fold-down push handles. Push handles sometimes act like fish hooks when pulling a chair out of storage. In contrast, fold-down push handles allow the chair to slide out without hooking everything else.

A special flat area on the axle-sleeve nut corrects toe-in and toe-out in three easy steps: Loosen the camber tube. Place a square against the flat area on the axle-sleeve nut and the ground. Re-tighten the camber tube. The wheels are now aligned.

The axle plate features 3" vertical adjustment in 1/2" increments. This provides plenty of space to adjust wheel sizes, seat height and seat angle.

The rear camber tube is secured to the axle plate with a special compression axle sleeve. The axle sleeve is held together with Torx® head screws. This advanced hardware is superior in design and holding power. A special tool kit containing Torx wrenches ships with the chair.